i love when you get to punch it.(the dough, not the cast iron ow!)
― tehresa, Sunday, 12 July 2009 23:50 (ten years ago) link
i'm with jaq on the kneading: meditative and gets yr blood pumping. plus if ya do it every week like me then when you shake hands you can crush 'em with yr kneading power!
― freakin pecan (jdchurchill), Friday, 24 July 2009 21:48 (nine years ago) link
I've barely started exploring this site, but it looks like a fantastic resource. I made the Italian Bread recipe today (starting with the preferment last night) and it turned out great! The loaves lost a bit of volume as I transferred them from the work table to their cooking surface (the back of a sheet pan w/parchment), but I think that was for the best, because the degree of airiness and fluffiness inside was exactly what I'd hoped for. Brushed them with water just before putting them in the oven, and had a pan of hot water in the oven as well, and they produced a nice crust.
― Hugh Manatee (WmC), Friday, 14 August 2009 22:05 (nine years ago) link
freshloaf looks boss, thanks wmc
― clouds taste metallica (jdchurchill), Friday, 14 August 2009 22:52 (nine years ago) link
Italian bread round 2 today. First loaf is out and cooling, 2nd loaf is halfway through baking. Variation: 2/3 unbleached bread flour, 1/3 whole wheat. (Last batch was all bread flour.)
My oven isn't big enough to bake both loaves at once, so the 2nd loaf gets an extra 40 minutes to rise under a damp towel.
― Hugh Manatee (WmC), Monday, 17 August 2009 19:28 (nine years ago) link
I forgot the salt when I was mixing. ;_;
Texture A+++, flavor D-
― Hugh Manatee (WmC), Monday, 17 August 2009 19:48 (nine years ago) link
maybe just put some salted butter on it?
― tehresa, Monday, 17 August 2009 19:49 (nine years ago) link
It's barely edible that way, and completely inedible without. ugh ugh ugh this is disgusting. Amazing what a bit of salt brings.
― Hugh Manatee (WmC), Monday, 17 August 2009 19:58 (nine years ago) link
yea that italian bread recipe is mad boss. i did it yesterday and it makes wicked sammy bread, nice crust and totally soft and chewy underneath. also will soak up tomato juices (r whateva) in yr sandwich without breaking/tearing. totally had to use more than 5c flour to make the dough tho. at the end 2 nice perky loaves, and even worked well in the regular loaf pan.
― blind melon baller (jdchurchill), Monday, 31 August 2009 20:10 (nine years ago) link
i give up on baking bread. i'll try again in 5 years :(
― permanent response lopp (harbl), Monday, 31 August 2009 20:30 (nine years ago) link
I love that Italian bread. I may start another batch tonight. Soft enough for sandwiches but firm enough to make great garlic toast -- it's gotta be firm/raspy enough when it comes out from under the broiler for the garlic-clove rubdown.
― Hugh Manatee (WmC), Monday, 31 August 2009 20:42 (nine years ago) link
so what recipe should i try next from the ol' freshloaf then?
― blind melon baller (jdchurchill), Monday, 31 August 2009 23:28 (nine years ago) link
No idea! I haven't gotten past the goodness of the Italian loaf. I was going to make flatbreads for gyro-style wraps, but I stocked up on my favorite brand when I was in Atlanta last week.
Maybe that buttermilk cluster -- if not this week or next, then def. when the weather cools down and I'm making a lot of soups and stews.
― Hugh Manatee (WmC), Tuesday, 1 September 2009 00:27 (nine years ago) link
ooh nice link!
the Lovely Emma B made some chestnut bread last week that was VERY VERY GOOD INDEED. it didn't rise so well at the end, but it had risen three times already so it still had a very nice and light interior.
she got the crust nice and brown and crunchy by using a spray bottle of water to mist some water into the oven as it was cooking. worked very well.
― Tracer Hand, Wednesday, 2 September 2009 11:47 (nine years ago) link
Another nice pair of Italian loaves last night. I'm starting to figure out the technique for shaping the dough into nice tight little boules that blow up beautifully on their final rise. I'm going to do the next batch in loaf pans just for the hell of it.
― Hugh Manatee (WmC), Friday, 4 September 2009 00:49 (nine years ago) link
yea i did the loaf pan the last 2 times, it works pretty good. gives you that friendly sandwich shape too. also just rolled out as long as i could get them and that made a nice baguette shape (with less dough, skinny) and a hearty italian loaf style shape (with more dough, fat).
i do have a question tho: why the dry milk?
over the weekend i substituted some of the water with milk and reduced the volume a little and that turned out basicly indistinguishable from the one with the dry milk. so why not just use milk? why dry milk and water? i don't understand, but this is normal when it comes to baking bread. there seems to be no standard(s) and a stupefying multitude of variations in just about every aspect of the process.
― Don't hag me with your false green. (jdchurchill), Wednesday, 9 September 2009 20:13 (nine years ago) link
i don't understand, but this is normal when it comes to baking bread. there seems to be no standard(s) and a stupefying multitude of variations in just about every aspect of the process.
this is exactly what i hate about it. i could never figure out how to just make bread.
― harbl, Wednesday, 9 September 2009 20:18 (nine years ago) link
i want to make something like trader joe's 6 grain w/ pumpkin seeds but can't find a recipe. i'd probably screw it up anyway!
why the dry milk?
In that italian bread recipe, it calls for 1/2 c dry milk and 2 c of water - that is basically double-strength milk, so adds considerable protein (and the changes it brings to texture) not diluted to the same strength as regular liquid milk (1/2 c dry milk to 4 c water). Dry milk powder is also a humectant, so would help delay the bread getting stale.
btw, I only use dry milk any more. I get the Bob's Red Mill low-temp version that has to be whizzed up in the blender. We mix it up a quart at a time for daily drinking (w/ a spoonful of added cream to make it whole milk), but for baking I generally mix the powder in with the other dry ingredients, then add water when it says to add milk.
― Jaq, Wednesday, 9 September 2009 20:28 (nine years ago) link
double strength milk . . . ok.
bbut jaq, you really drink that instead of real milk? i guess it's prolly cheaper right? i dunno maybe i have a false sense of milk. never been a huge fan, just pretty much keep it around so my gurl can eat cerealz and we put it in our coffee.
thanks for the tip tho.
― Don't hag me with your false green. (jdchurchill), Wednesday, 9 September 2009 22:59 (nine years ago) link
Yeah, we drink it - I was very surprised how good it is, but it's definitely because I use the low temperature process "non-instant" type. The normal "instant" kind, that you can just stir into water and it dissolves, tastes vile because it's run through a high temperature process that cooks it. The keys are using the low temp sort, adding some heavy cream to it, and letting it sit in the fridge overnight before drinking it straight. I use it on cereal and in tea and coffee too.
I started buying dry milk in order to make cheese and yoghurt - it's 1/4 the cost of liquid organic milk, and doesn't take up any space. It's great to be able to mix up a small batch, to not worry about running out of milk, or find out at the last minute that the carton has gone off.
― Jaq, Wednesday, 9 September 2009 23:17 (nine years ago) link
First loaf I've baked in over a year due to moving, hot weather, general not-baking-moodiness:http://farm4.static.flickr.com/3469/3943412968_f59afb832e.jpg http://farm3.static.flickr.com/2596/3942640175_d26da40340.jpg
― Jaq, Tuesday, 22 September 2009 02:20 (nine years ago) link
looks good jaq, what do you utilize when slashing the tops? and when do you do it? i can never get that damn technique to work.
― Don't hag me with your false green. (jdchurchill), Tuesday, 22 September 2009 22:40 (nine years ago) link
I've got a 12" slicing knife I generally keep a really sharp edge on. I slash the top right before the dough goes in the oven, so after it's risen about an inch over the top of the pan when I do a sandwich/toast loaf like this one.
― Jaq, Wednesday, 23 September 2009 00:00 (nine years ago) link
bets: would this turn out really gross?http://www.pccnaturalmarkets.com/cgi/recipeget.cgi?id=735
― tehresa, Tuesday, 6 October 2009 16:53 (nine years ago) link
Might be okay right out of the oven, but hard as a rock and nasty later.
― Jaq, Tuesday, 6 October 2009 17:25 (nine years ago) link
so jaq (sorry i am so late response time) that's like a serrated knife then?
― let the glory boy mr. henry have it on rye (jdchurchill), Thursday, 15 October 2009 23:32 (nine years ago) link
nope, just a standard blade, like this.
― Jaq, Friday, 16 October 2009 00:05 (nine years ago) link
so for my own curiosity what is the advantage of using that knife over say a regular chef knife?
― let the glory boy mr. henry have it on rye (jdchurchill), Friday, 16 October 2009 00:44 (nine years ago) link
Probably the fact that it's 4" longer, so the way the blade contacts the top of the loaf is different. It's also a knife I use less, so the edge stays truer/sharper. There are these special bread dough slashing tools called lames, but I'm not much for single-purpose utensils personally.
― Jaq, Friday, 16 October 2009 01:53 (nine years ago) link
I needed to clear out a cupboard and found some very old baking ingredients - yeast, milk powder, sugar, flour, but unfortunately no butter or even oil or any kind of fats - so I chucked them in the long languishing bread machine anyway to see what will happen...
What will happen if you try to bake bread that should have fats in it, without any whatsoever? Your predictions please. Results in five hours.
I'm ready for, even certain of, failure, but am interested to see what the hell does come out.
― krakow, Thursday, 26 November 2009 10:03 (nine years ago) link
probably will be better than leaving out the water, as a friend did once.
― George Mucus (ledge), Thursday, 26 November 2009 10:16 (nine years ago) link
I'll eat pretty much anything, so it shouldn't go to waste whatever happens.
― krakow, Thursday, 26 November 2009 10:17 (nine years ago) link
it'll be bread of some sort. also the milk powder should help.
― tomofthenest, Thursday, 26 November 2009 10:39 (nine years ago) link
well ... ?
― George Mucus (ledge), Thursday, 26 November 2009 16:29 (nine years ago) link
It look ok-ish. Kind of like a loaf of bread, albeit a wee balled-up one.
Going to crack it tonight and see what the inner verdict is. Not a complete disaster at least. The age of the ingredients is probably more to do with it, particularly the yeast meaning it didn't really rise, rather than the lack of a wee touch of butter.
Eating verdict later.
― krakow, Thursday, 26 November 2009 17:24 (nine years ago) link
when I first started baking bread I sorta jumped ahead of myself and tried to make Broa, the Portugese corn-meal-and-flour bread - my attempt back then didn't really turn out so great, so I haven't tried it since. But that was ten years ago, and I've been cooking and baking constantly since then, so I tried it again last night, using a recipe in the Artisan Bread in 5 Minutes A Day book (which, I don't even know what the book is really about since at this point when I get a cookbook I generally just go straight to the recipes & I know enough about the making-your-oven-a-steam-oven stuff from all the Bittman business last year). Anyway.
It is incredibly delicious.
― a full circle lol (J0hn D.), Saturday, 12 December 2009 22:37 (nine years ago) link
never heard of it. love cornmeal though.
do you think you can fit baking bread into a normal weekday schedule (i.e. not having to check on it every few hours)?
― Maria, Sunday, 13 December 2009 14:02 (nine years ago) link
maria i usually make bread on saturdays or sundays, that way i don't have to stay up late. checking it is essential at certain points, but how long between those points is generally very flexible.
― Meteor Crater (jdchurchill), Tuesday, 15 December 2009 23:45 (nine years ago) link
dudes it's ciabatta time. i have been reading bread by hammelman. look out world.
― Meteor Crater (jdchurchill), Sunday, 3 January 2010 17:35 (nine years ago) link
holy cow ciabatta is good, dudesmost perfect sandwich bread to me right now
― Meteor Crater (jdchurchill), Monday, 4 January 2010 21:13 (nine years ago) link
i have never made bread with holes in the crumb (except pitta bread which doesn't count)! what is the secret to this amazing trick?
― lords of hyrule (c sharp major), Monday, 4 January 2010 22:03 (nine years ago) link
Not sure -- I just follow the Italian bread recipe linked above and shazam, there are the holes. I followed a recipe for "white sandwich bread" -- no holes, smooth wonderbread texture, a good bit heavier though. Maybe it's the preferment to kickstart the fermentation -- the holey bread uses it and the white bread doesn't.
― America's Next Most Disabled Ballerina (WmC), Monday, 4 January 2010 22:10 (nine years ago) link
i followed recipe/process from bread by hamelman. it used a biga (stiff preferment) and i think the secret is to handle the dough as little and as gently as possible, as it is very wet. like 70% water, dudes. and hamelman does this thing during fermentation (what most people think of as rising) where you fold the dough instead of merely punching it down. then after 3 hours of fermentation, you cut the dough into appropriately sized pieces and let em proof again and bake it. no kneading, no shaping. in fact i have plowed through hamelman's book without once seeing the word knead anywhere. needless to say i was surprised by the lack of mentioning kneading as i had thought it was a central skill of baking bread.
― Meteor Crater (jdchurchill), Monday, 4 January 2010 22:42 (nine years ago) link
I know enough about the making-your-oven-a-steam-oven stuff from all the Bittman business last year). Anyway.
― a full circle lol (J0hn D.), Saturday, December 12, 2009 4:37 PM (3 weeks ago) Bookmark
dude what technique(s) do you utilize for steam production john? or can you link to the "bittman business last year" you refer to above?
― Meteor Crater (jdchurchill), Monday, 4 January 2010 22:45 (nine years ago) link
I have only recently learned the word is "proof" – when I worked at a donut shop, everyone talked about letting the dough "perf."
― girl moves (Abbott), Monday, 4 January 2010 23:07 (nine years ago) link
The owner told me "to let the dough perf 'til it feels like a fat lady's ass."
― girl moves (Abbott), Monday, 4 January 2010 23:08 (nine years ago) link
proof=rising=fermentationlol about fat ladies asses
― Meteor Crater (jdchurchill), Monday, 4 January 2010 23:13 (nine years ago) link
haha yeah that's amazing!
― Maria, Tuesday, 5 January 2010 14:39 (nine years ago) link
It was not maybe the most useful advice in a lot of ways, the main one being I'd never had my hands on a fat anyone's ass. So I'd poke at the dough intermittently and every time my mind would ask, 'Ass? Ass?'
― girl moves (Abbott), Tuesday, 5 January 2010 16:56 (nine years ago) link
agree soda bread is mad easy and good to do
― Want A+ tasty food homemade (jdchurchill), Monday, 16 August 2010 01:41 (eight years ago) link
I made this buttermilk cluster as two loaves instead of a pan of rolls -- very nice, fine-textured crumb, better for sandwiches than the italian loaves I'd been making. And like all homemade bread, it makes great toast.
― the wages of sin is about tree fiddy (WmC), Sunday, 17 April 2011 17:16 (eight years ago) link
for my chi-town peeps i am involved in teaching bread classes as part of http://www.sourflour.org/chicago/
― Das Unbehagen in der Kultur (jdchurchill), Thursday, 2 February 2012 02:24 (seven years ago) link
How important is putting bread dough into a preheated oven? I use the oven as a proofing chamber because the kitchen stays pretty cold and the pilot light keeps the oven warm but not too hot. When it's time to bake, could I just turn on the oven without taking the dough out? I'm proofing it in the dutch oven that it bakes in.
― oldbowie (WilliamC), Monday, 30 December 2013 17:05 (five years ago) link
there's a discussion herehttp://community.kingarthurflour.com/content/starting-cold-oven
i think it ultimately depends on if the dutch oven is ceramic or cast iron --- it seems that a cold oven is suggested for ceramic receptacles/baking stones etc so that they don't crack, but if yr using cast-iron or enamelled cast-iron, you wouldn't need to do that & it may change how the bread turns out?
it's been years since I made bread from scratch, so idk
― set the controls for the heart of the sun (VegemiteGrrl), Monday, 30 December 2013 19:40 (five years ago) link
It's enameled cast iron. It's rising very well in the oven, and I don't want to accidentally de-gas the dough with the impact of moving it around a couple of times, especially into a colder environment, so I'm going to try just turning the oven on. Thanks for that link!
― oldbowie (WilliamC), Monday, 30 December 2013 20:29 (five years ago) link
It depends a lot on the dough - for most, you want a hot oven so the steam/gas in the dough can puff it up before the crust forms too much. A slower oven dries out the dough more during the rising/crust forming stages, again for most.
― Jaq, Monday, 30 December 2013 20:31 (five years ago) link
My last couple of bakes have been absolutely beautiful. Letting the preferment sit overnight was not working -- cutting back to four hours tops meant it was still very active and raring to go when I mixed the dough. Finally getting the hang of the Kitchenaid mixer. For this last batch, I had new silicone loaf pans. Got a huge oven bounce.
http://img.photobucket.com/albums/v296/WilliamCrump63/aprilbread2.jpg http://img.photobucket.com/albums/v296/WilliamCrump63/aprilbread1.jpg http://img.photobucket.com/albums/v296/WilliamCrump63/aprilbread3.jpg
― WilliamC, Sunday, 6 April 2014 15:12 (five years ago) link
― Jaq, Sunday, 6 April 2014 15:17 (five years ago) link
Thanks! I'm learning that little things can mean so much -- barely warming the oiled bowl that the dough rises in, and making a slightly wetter dough. But not exhausting the preferment has been the most important lesson.
― WilliamC, Sunday, 6 April 2014 15:30 (five years ago) link